Product name:

Edel Wasser / Gold

Product key:

PWC-670-GOLD

Use:

 For home use. Device for purifying water on the principle of reverse osmosis

Gross weight: (kg)

5.8

Net weight (kg)

4.5

Dimensions:

200 mm (width) x 390 mm (depth) x 370 mm (height)

The color:

black and gold

Functions:

Water filtration

Cleaning method:

 Reverse osmosis

Type of applied filters:

 NEO SENSE - mechanical filter, INNO SENSE - mechanical carbon

filter, RO membrane 20 GPD, Antibacterial filter

Filter replacement:

Recommended filter replacement time, counting from the day of installation: 

•PWC-670-01 NEO SENSE - mechanical filter - every 6 months

• PWC-670-02 INNO SENSE - mechanical carbon filter - every 18 months

• PWC-670-03 RO membrane 20 GPD - every 20-24 months

• PWC-670-09N Hygiene filter - every 12-20 months

The table shows approximate values, expected replacement time, not warranty period. To

ensure optimal filtration, you may need to change the filters more often. The speed and

quality of filtration mostly depend on the pressure, temperature and quality of the incoming

water. Reverse osmosis always creates waste water. For EDELWASSER, that ratio is 4:1, and in

the case of low water pressure, up to 6:1.

Tank volume:

3.9L

Purification capacity: 

76.8 l/day

Working temperature:

 From 5ºC to + 35ºC

W Stress:

 Not applicable

Work pressure:

 138 kPa - 827 kPa

Protection:

 Float valve (interrupts water purification)

Composition:

Service and installation instructions - device (with filters: Neo-sense, filter

with RO membrane and Inno-sense) - elbow (¼", white) - 4 pcs. drain clamps - 1 pc. water

hose (double, ¼") - 5 m, adapter ½ (valve ¼) - 1 pc. antibacterial filter - 1 pc. clips x 2

Montage:

The seller provides installation. EDELWASSER, a water purifier, is placed on the worktop in

the kitchen. Device installation, commissioning and maintenance can only be performed by

authorized Zepter service personnel. To prepare the installation site, we recommend:

 • The distance between the connection point and the installation site of the device is a maximum

of 1.5 m

• The distance between the device and the water source must not be more than 3

Meters

 • The distance from the drain must not be more than 3 m

• The dimensions of the place

intended for installation should correspond to the dimensions of the EDELWASSER appliance.

It is recommended to install it near the sink so that the water inlet and outlet hoses are

easily accessible. Note: Depending on the place of installation and the technical

possibilities of connecting to the water drain, it may be necessary to drill a hole - for

example on the kitchen worktop. Therefore, any additional work related to the preparation of

the installation site and the connection of the appliance (such as special drilling of holes

in worktops made of stone, marble and other hard materials, adaptation of the drainage

system, installation of a special water supply, provision of additional valves and

connections) must be carried out by the customer on at your own expense. Zepter provides a

standard/basic installation service on a prepared infrastructure with simple drilling of the

kitchen worktop.

Country of origin:

Korea

Supplier:

Home Art & Sales Services AG, Switzerland

Importer

Zepter International d.o.o., New  Belgrade

Warranty:

5 years (Legal warranty - 5 years of Seller's responsibility for compliance with

the Agreement) Does not apply to filters

Certificates/Declarations:

Declaration of conformity with Regulation (EC) Nº1935/2004 for materials and

things that come into contact with food.